Changeover & current limiting divice in Delhi
See more ads!
Siguenos en Facebook
• It is a fully automatic system for on line pumps-(corporation line) for filling up the underground tank.
• Motor will start automatically if water level in the tank falls below a low level (tank is half empty).
It will protect the motor against unavailability of water, air locking & dry running.
System will switch OFF the motor within 2 min if above three condition are not met and will start the pump again after 30min/ 60min to check it again.
As the tank is filled up it will switch off the pump automatically.
It is also provided with 3 indicators to show water level of the tank. (1/4, 1/2 & full.
Water in line indicator will glow if there is water is available in the pipe line.
It is provided with manual button/switch to switch ON the motor pump irrespective of water status in the tank.
• It is a fully automatic system for submersible pumps.
Motor will start automatically when overhead tank becomes half empty.
Motor-pump will switch off in two conditions
• a. When the over head tank is full.
b. When water reaching the over head tank is not continuous.
It will protect the motor against unavailability of water, air locking & dry running.
System will switch OFF the motor within 2 min if above three condition are not met.
As the tank is filled up it will switch off the pump automatically.
It is also provided with 3 indicators to show water level of the tank.
• (1/4, 1/2, & full or main empty full)
It is provided with manual button/switch to switch ON the motor pump irrespective of water status in the tank.
• Motor will start automatically if water level in the tank falls below a low level (tank is half empty).
It will protect the motor against unavailability of water, air locking & dry running.
System will switch OFF the motor within 2 min if above three condition are not met and will start the pump again after 30min/ 60min to check it again.
As the tank is filled up it will switch off the pump automatically.
It is also provided with 3 indicators to show water level of the tank. (1/4, 1/2 & full.
Water in line indicator will glow if there is water is available in the pipe line.
It is provided with manual button/switch to switch ON the motor pump irrespective of water status in the tank.
• It is a fully automatic system for submersible pumps.
Motor will start automatically when overhead tank becomes half empty.
Motor-pump will switch off in two conditions
• a. When the over head tank is full.
b. When water reaching the over head tank is not continuous.
It will protect the motor against unavailability of water, air locking & dry running.
System will switch OFF the motor within 2 min if above three condition are not met.
As the tank is filled up it will switch off the pump automatically.
It is also provided with 3 indicators to show water level of the tank.
• (1/4, 1/2, & full or main empty full)
It is provided with manual button/switch to switch ON the motor pump irrespective of water status in the tank.
Photos of ad
Replies to this Ad
Quick! leave your comment on this ad:
[will not be visible, you receive a response to your comment]
[will not be visible, you receive a response to your comment]